Operation Manual

VigorAP 710 User’s Guide
31
3
3
.
.
3
3
.
.
4
4
O
O
v
v
e
e
r
r
l
l
o
o
a
a
d
d
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
Load Balance can help to distribute the traffic for all of the access points (e.g., VigorAP 710)
registered to Vigor router. Thus, the bandwidth will not be occupied by certain access points.
However, traffic overload might be occurred if too many wireless stations connected to
VigorAP 710 for data incoming and outgoing. Therefore, “Force Overload Disassociation” is
required to terminate the network connection of the client’s station to release network traffic.
When the function of “Force Overload Disassociation” in web user interface of Vigor router
(e.g., Vigor2860 or Vigor2925 series) is enabled, wireless clients specified in black list of
such web page will be disassociated to solve the problem of traffic overload.
The following web page is used to configure white list and black list for wireless stations.
Available settings are explained as follows:
Item Description
White List/Black List
Display the information (such as index number, MAC address
and comment) for all of the members in White List/Black List.
Wireless stations listed in Black List will be forcefully
disconnected first when traffic overload occurs and “Force
Overload Disassociation” is enabled.
Client’s MAC
Address
Specify the MAC Address of the remote/local client.
Apply to
White List – MAC address listed inside Client’s MAC Address
will be categorized as one of members in White List.
Black List - MAC address listed inside Client’s MAC Address
will be categorized as one of members in Black List.
Add
Add a new MAC address into the White List/Black List.
Delete
Delete the selected MAC address in the White List/Black List.
Edit
Edit the selected MAC address in the White List/Black List.