Operation Manual

VigorAP 710 User’s Guide
146
Function Support List, 27
Ｇ
General Setup, LAN, 23
Guest Wireless, 14, 18
Ｈ
Hardware Installation, 4
Hardware Reset, 134
Hide SSID, 33, 80
HTTPS, 103
Ｉ
Interference Monitor, 125
IP Address, 23, 91
Isolate LAN, 60, 81
Isolate Member, 33, 60, 81
Ｋ
Key Renewal Interval, 36, 62, 82
Key Size, 103
Key Type, 103
Ｌ
LAN, 23
Lease Time, 24
LED Indicators and Connectors, 2
Limit Client per SSID, 52, 59, 80
Load Balance, 28
Ｍ
MAC Address Filter, 38
MAC Clone, 41, 55, 67, 87
Main Screen, 21
Main SSID, 13
Management, 118
Management VLAN, 23
Mobile Device Management, 107
Mode, 33, 35, 53, 59, 61, 80, 81
Ｎ
Network Configuration, 5
NTP, 104
NTP Client, 117
NTP Server, 117
NTP synchronization, 117
Ｏ
Online Status, 20
Open/Shared, 17, 91
Operation Mode, 12, 22
Overload Management, 28
Ｐ
Packet-OVERDRIVE, 40, 54, 66, 86
Pass Phrase, 36, 62, 82, 91
Password, 11
Password Strength, 113
Peer MAC Address, 53, 60
Periodic Inform Settings, 112
PHY Mode, 53, 60
PIN Code., 31
PinCode, 85
Pinging the Modem, 133
PMK Cache Period, 49, 77
Policy, 38, 64, 84, 108
Port, 37
Pre-Authentication, 49, 77
Primary DNS Server, 24
Push Button, 65, 85
Ｑ
Quick Start Wizard, 12
Ｒ
RADIUS Server, 36, 62, 83, 101
RADIUS Setting, 101
Rate, 53, 60
Rate Adaptation Algorithm, 41, 55, 67, 87
Reboot System, 118
Reconnection Time, 47, 97
Relay Agent, 24
Restore, 39, 102
Restore Configuration, 115
Roaming, 48, 76, 98
RSSI, 48, 98
RTS Threshold, 41, 55, 67, 87