Operation Manual

VigorAP 710 User’s Guide
117
Available settings are explained as follows:
Item Description
ACS Settings
URL/Username/Password – Such data must be typed according
to the ACS (Auto Configuration Server) you want to link. Please
refer to Auto Configuration Server user’s manual for detailed
information.
Wizard – Click it to enter the IP address of VigorACS server,
port number and the handler.
Test With Inform – Click it to send a message based on the
event code selection to test if such CPE is able to communicate
with VigorACS SI server.
Event Code – Use the drop down menu to specify an event to
perform the test.
Last Inform Response Time – Display the time that VigorACS