Operation Manual

VigorAP 710 User’s Guide
106
Delete Selected – Delete the selected user profile (s).
Delete All – Delete all of the user profiles.
Authentication Client
This internal RADIUS server of VigorAP 710 can be treated as
the external RADIUS server for other users. Specify the client IP
and secret key to make the wireless client choosing VigorAP
710 as its external RADUIS server.
Client IP – Type the IP address for the user to be authenticated
by VigorAP 710 when the user tries to use VigorAP 710 as the
external RADIUS server.
Secret Key – Type the password for the user to be authenticated
by VigorAP 710 while the user tries to use VigorAP 710 as the
external RADIUS server.
Confirm Secrete Key – Type the password again for
confirmation.
Configure
 Add – Make a new client with IP and secrete key
specified on the left boxes.
 Cancel – Clear current settings for the client.
Delete Selected – Delete the selected client(s).
Delete All – Delete all of the clients.
Backup
Click it to store the settings (RADIUS configuration) on this
page as a file.
Restore
Click it to restore the settings (RADIUS configuration) from an
existed file.
After finishing this web page configuration, please click OK to save the settings.
3
3
.
.
9
9
.
.
2
2
C
C
e
e
r
r
t
t
i
i
f
f
i
i
c
c
a
a
t
t
e
e
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
When the local client and remote client are required to make certificate authentication (e.g.,
IPsec X.509) for data passing through SSL tunnel and avoiding the attack of MITM, a
trusted root certificate authority (Root CA) will be used to authenticate the digital certificates
offered by both ends.
However, the procedure of applying digital certificate from a trusted root certificate authority
is complicated and time-consuming. Therefore, Vigor router offers a mechanism which
allows you to generate root CA to save time and provide convenience for general user. Later,
such root CA generated by DrayTek server can perform the issuing of local certificate.
In addition, you can build a Root CA certificate by clicking Create Root CA if required.
Note that Root CA can be deleted but not edited. If you want to modify the settings for a
Root CA, please delete that one and create another one by clicking Create Root CA. After
clicking Create Root CA, the web page will be shown as below.