User`s guide

VigorPro5510 Series User’s Guide
60
WAN1 This page allows you to configure Private IP or Active True IP as
DMZ host.
WAN2 This page allows you to configure Private IP as DMZ host.
Private IP If you choose Private IP as DMZ host, you can type a private IP in
this box or use Choose PC button to choose the one you want.
MAC Address of the
True….
If you choose Active True IP as DMZ host, please type the
MAC address of the one you want.
If you previously have set up WAN Alias in Internet Access>>PPPoE, you will find them
in Aux. WAN IP list for your selection.
Enable Check to enable the DMZ Host function.
Private IP Enter the private IP address of the DMZ host, or click Choose PC
to select one.
Choose PC Click this button and then a window will automatically pop up, as
depicted below. The window consists of a list of private IP
addresses of all hosts in your LAN network. Select one private IP
address in the list to be the DMZ host.
When you have selected one private IP from the above dialog, the IP address will be shown
on the following screen. Click OK to save the setting.