User`s guide

VigorPro5510 Series User’s Guide
229
SysLog Access Setup
Enable (Syslog Access…)
Check “Enable” to activate function of syslog.
Router Name
Assign a name for the router.
Server IP Address
The IP address of the Syslog server.
Destination Port
Assign a port for the Syslog protocol.
Enable syslog message
Check the box listed on this web page to send the
corresponding message of firewall, VPN, User Access,
Call, WAN, Router/DSL information to Syslog.
A
I/AV AlertLog Setup
Enable (Alert Setup…)
Check “Enable” to activate function of AI/AV attack log.
AlertLog Port
Type the port number for the alertlog and Check the box
to send the corresponding message of AI/AV Attack Log,
Access Block Log to Syslog.
Mail Alert Setup
Enable (Alert Setup…)
Check “Enable” to activate function of mail alert.
Send a test e-mail
Make a simple test for the e-mail address specified in this
page. Please assign the mail address first and click this
button to execute a test for verify the mail address is
available or not
SMTP Server
The IP address of the SMTP server.
Mail To
Assign a mail address for sending mails out.
Specify an e-mail address of another mailbox to accept
all returned messages if some fatal problems occur at the
recipient mailbox. The e-mail address typed in this field