User`s guide

VigorPro5510 Series User’s Guide
224
LAN ---
MAC Address Display the MAC address of the LAN Interface.
1
st
IP Address Display the IP address of the LAN interface.
1
st
Subnet Mask Display the subnet mask address of the LAN interface.
DHCP Server Display the current status of DHCP server of the LAN
interface.
DNS Display the assigned IP address of the primary DNS.
WAN1/WAN2 ---
Link Status Display the connection status.
MAC Address Display the MAC address of the WAN Interface.
Connection Display the connection mode used currently.
IP Address Display the IP address of the WAN interface.
Default Gateway Display the assigned IP address of the default gateway.
Wireless LAN ---
MAC Address Display the MAC address of the wireless LAN.
Frequency Domain It can be Europe (13 usable channels), USA (11 usable
channels) etc. The available channels supported by the
wireless products in different countries are various.
Firmware Version Display information about equipped WLAN miniPCi
card. This also helps to provide availability of some
features that are bound with some WLAN miniPCi card.
SSID Display the identification name for the WLAN.
3
3
.
.
1
1
6
6
.
.
2
2
T
T
R
R
-
-
0
0
6
6
9
9
S
S
e
e
t
t
t
t
i
i
n
n
g
g
Vigor router with TR-069 is available for matching with VigorACS server. Such page
provides VigorACS and CPE settings under TR-069 protocol. All the settings configured
here is for CPE to be controlled and managed with VigorACS server. Users need to type
URL, username and password for the VigorACS server that such device will be connected.
However URL, username and password under CPE client are fixed that users cannot change
it.
The default CPE username and password are "vigor" and "password". You will
need it when you configure VigorACS server.