User`s guide

VigorPro5510 Series User’s Guide
219
Enable Application
Service
Check this box to enable this application.
Application Name
Type the profile name for the application.
Application
Use the drop down list to choose an application applied to
this profile.
Different application type will lead different web pages.
Refer to the following:
z Virtual Network Computing – Choose this item for accessing and controlling a
remote PC through VNC protocol.
IP Address
Type the IP address for this protocol.
Port
Specify the port used for this protocol. The default setting is
5900.
Scaling
Chose the percentage (100%, 80%, 60%) for such
application.