Installation guide

6
Admin Status
Use the default settings (Enable).
Local Gateway
It deals with relevant settings of the local router, including selection of the WAN and
internal network, etc.
WAN Interface
Vigor 3300V has 4 WAN ports. In this example, we choose WAN1 to establish the VPN
tunnel.
Network IP / Subnet Mask
It is the internal network of Vigor 3300V. Please enter 192.168.33.0 /24 (/24 = Mask
255.255.255.0).
Remote Gateway
It deals with relevant settings of the remote router, including WAN IP and internal
network, etc.
Security Gateway
It is about the WAN IP of Vigor2900V. In this example it is not fixed, so please enter
0.0.0.0.
Network IP / Subnet Mask
It is the internal network of Vigor2900V. Please enter 192.168.29.0 /24 (/24 = Mask
255.255.255.0).
Please refer to Figure 2-3.
Figure 2-3. Web settings of Vigor 3300V