Installation guide

72

Step 2
Setup Port 1. This page falls into two sections,
 SIP: Set up the SIP Server used for registration.
 Ports: Set up the account details.
After configuration please click OK to save the settings.
Figure 3-32. Port1 setting
Note
Do not set up the Proxy and Stun Server when calling through VPN. While in 2200V
firmware v2.5.5.4, the Proxy will be active if Use Registrar is enabled. So make sure not
click Use Registrar.
Step 3
Enter VoIP - DialPlan page and the first and second group of Speed Dial Phone Number.