Installation guide

Display incoming call's information. To facilitate ease differentiation please

type 3300V_Port1_iptel.

Proxy Server

Select the SIP Server used for registration from the pull-down menu. There are

None and three SIP Servers available, which are set in the VoIP- Protocol page.

Please select iptel.



FXO

Dedicated settings for FXO card.

Incoming Pre-Set Number: The transfer number auto dialed after the FXO

receives a call from the Internet.

Figure 3-3. Port1 setting page

 Codec

Setup the voice compression mode and transfer rate, etc.

Preferred Codec

Preferred voice compression mode. It will affect voice quality and transferred

data size. By default is G.729A – 8kbps.

Codec Rate

Transfer rate of the voice packets. By default is 20ms.

Codec VAD

This feature can reduce the number of transmitted bits and packets during

silence periods. But it may slightly affect the voice quality. By default is

Disable.

 CAS

Adjust the volume of the conversation.

RX Gain

The default value is 0.

TX Gain

The default value is



FAX