Installation guide

29. VoIP Example 1

(Basic Configuration and Registration)

This chapter shows how to set up a practical example to use VoIP function.

This chapter is divided into the following sections.

Section 29.1: Basic Configuration and Registration

Section 29.2: 3300V Configuration Example

Section 29.3: 2900V Configuration Example

There are many different kinds of applications about VoIP function, most of VoIP

callings must be via a VoIP Server by registering, except we can dial VoIP number by the

IP address directly. We will set up a basic configuration and registration as an example 1.

The other examples might be revised based on this example.

The VoIP function mainly depends on the requirement and application. All the examples

are based on example 1 to revise configuration in accordance with the usage requirement

and application.

Example 1

Basic Configuration and Registration

Example 2

Basic Dialing Mode

Example 3

VoIP over VPN

Example 4

Practical Application of FXS

Example 5

Practical Application of FXO

Example 6