Installation guide

51
Step 3
Press click Insert to create a new VPN profile.
Figure 2-85. Create a new VPN profile
Step 4
Specify a name for this profile (surely you may leave this option as default), type
218.242.130.19 (WAN interface IP address in 3300) in the VPN server IP field, enter the
username/password, and select PPTP in the Type of VPN. Please be sure to enter the
identical Authentication and Encryption settings that you set in Vigor 3300. And you do
not have to click “Use default gateway on remote network”, unless you want all the
traffic to be routed via the remote network.
Figure 2-86. Dial to VPN