Installation guide

49
Step 2
Enter VPN - PPTP - Group Table. And you can specify the IP range that be allocated to
the remote hosts (Star IP), and the local IP range which is accessible to the remote hosts
(Accessed IP).
There’re 4 groups of IP range in the Group Table as following Figure 2-81.
Figure 2-81. PPTP group table
Note:
If you leave the Accessed IP field empty, then the whole local subnet is fully accessible
to the remote dial-in user.
And the Start IP field MUST be configured; Otherwise, the tunnel will not be
established.
Step 3
Go to VPN - PPTP – Authentication, and select a related entry, then click Edit to
modify the entry.
Figure 2-82. PPTP authentication