Installation guide

41
Step 7
Enter the web page of Vigor 3300V and enter VPN\IPSec\Status, you will see two VPN
tunnels have been established.
Figure 2-68. VPN - IPSec – Status
Step 8
Enter the CLI and attempt to ping 192.168.29.1 ( Vigor 2900V) and ping
192.168.22.1
( Vigor 2200V) to see there is any response.
Figure 2-69. Command prompt
Now all these 3 sites can connect to each other.
Note
Please note all the VPN traffic will be passed through the 3300V. If there is much data
flow between Vigor 2200V and Vigor 2900V, the bandwidth of Vigor 3300V, especially
the upstream one will be heavily consumed accordingly.