Installation guide

39
TCP/IP Network Settings
The internal network of the remote site, etc.
In the Network IP and Mask fields, enter 192.168.0.0 and 255.255.0.0 respectively, and
then press “OK” to finish the configuration.
Figure 2-64. VPN setup - TCP/IP network settings
Step 4
After configuration, the router will automatically switch to the LAN-to-LAN Profiles
Setup page. Confirm if the settings are correct. Now the configuration of Vigor 2200V is
completed.
Figure 2-65. The setting status for Vigor 2200V is completed