Installation guide

38
Dial-Out Setting
It deals with relevant settings of Dial-Out connection, including encryption method,
preshared key and the WAN IP of remote site.
Select IPSec Tunnel and enter the WAN IP 219.81.160.206 of Vigor 2900V. Press IKE
Pre-Shared Key button and a window will pop-up, type 1234 (It must be identical with
3300V's). Press Confirm to finish the configuration of IKE Pre-Shared Key. Then click
High (ESP) and select DES with Authentication (default is DES without
Authentication ).
Figure 2-62. VPN setup - Dial-out settings
Dial-in Setting
It deals with relevant settings of Dial-In connection. In this example, there is no need to
configure this part.
Figure 2-63. VPN setup - Dial-In settings