Installation guide

37
Step 3
On this page there are four sections regarding VPN configuration.
Common Setting
It deals with basic settings, including profile name, enable or disable the profile, call
direction, etc.
Profile Name
You can specify a name to this profile. To facilitate easy management and differentiation,
please type 3300V.
Call Direction
Specify the call direction to this profile. In this example the connection is initiated from
Vigor 2200V to Vigor 3300V, so please select Dial-Out. In this example Vigor 3300V is
not allowed to dial in.
Always On
If the VPN connection is terminated, the router will continuously attempt to establish the
VPN.
PING to Keep Alive
To avoid the situation in which the connection goes down unexpectedly, Vigor uses "Ping
to keep alive" method to detect if the peer router is reachable. Enable this feature and
enter “192.168.33.1” in the “PING to the IP” field.
Figure 2-61. VPN setup - Common settings