Installation guide

32
Step 3
Click Index 1, and enter relevant settings of the VPN tunnel connected to Vigor 3300V.
Figure 2-50. Enter relevant VPN setup
Step 4
On this page there are four sections regarding VPN configuration.
Common Setting
It deals with basic settings, including profile name, enable or disable the profile, call
direction, etc.
Profile Name
You can specify a name to this profile. To facilitate easy management and differentiation,
please type 3300V.
Call Direction
You can specify the call direction to this profile. In this example the connection is
initiated from Vigor 2900V to Vigor 3300V, so please select Dial-Out. In this example
Vigor 3300V is not allowed to dial in.
Idle Timeout
By default, it is 300 seconds. If the profile connection is idle over the threshold of the
timer, the router will drop the connection.
Always On
If the VPN connection is terminated, the router will continuously attempt to establish the
VPN.