Installation guide

28
Step 4
After configuration, the router will automatically switch to the VPN - IPSec - Policy
Table page. Click 2, and then press Edit.
Figure 2-44. VPN - IPSec - Policy table (edit 2)
Step 5
Firstly you should enter the Default page. There are three fields on this page.
Basic
It deals with basic settings, including profile name, authentication type, preshared key,
etc.
Name
You can specify a name to this profile. To facilitate easy management and differentiation
please type 2200V.
Preshared Key
Type 1234 (It must be identical with 2200V's).
Admin Status
Use the default settings (Enable).
Local Gateway
It deals with relevant settings of the local router, including selection of the WAN and
internal network, etc.
WAN Interface
Vigor 3300V has 4 WAN ports. In this example, we choose WAN2 to establish the VPN
tunnel.