Installation guide

22
Step 6
Please wait for 30~60 seconds, and then enter the VPN - IPSec – Status page of Vigor
3300V. You will find that this VPN tunnel has been established.
Figure 2-33. VPN - IPSec - Status page
Step 7
Please enter the CLI and ping 192.168.29.1(2900V) to see if there is any response.
Figure 2-34. Command prompt
Step 8
If the numbers of Packet In & Packet Out increase, it means there is traffic through the
VPN tunnel.
Figure 2-35. The numbers of packet in & packet out
Step 9
Please enter the main page of Vigor 2900V and click “VPN Connection Management”.
And then you will find this VPN tunnel has been established.
Figure 2-36. VPN connection management