Installation guide

21
Step 3
Advanced page
By default, Vigor 3300V allows des-md5, des-sha1, 3des-md5 and 3des-sha1. Change the
sequence of des-md5 and des-sha1 so that des-sha1 is in first place. Press “Apply” to
finish the configuration.
Figure 2-30. Advanced page setup
Step 4
After configuration, the router will switch to the VPN - IPSec - Policy Table page. Click
“Initiate”.
Figure 12-31. IPSec policy table
Step 5
A window for this Dial-Out connection will pop up. Press “OK” to initiate this tunnel.
Figure 2-32. The confirmation window