Installation guide

18
TCP/IP Network Settings
It deals with the internal network of the remote site, etc.
In the Network IP and Mask fields, enter 192.168.33.0 and 255.255.255.0 respectively,
and then press “OK” to finish the configuration. Please refer to Figure 2-27.
Figure 2-27. VPN setup- TCP/IP network settings
Step 5
After configuration, the router will automatically switch to the LAN-to-LAN Profiles
Setup page. Confirm if the settings are correct. Now the configuration of Vigor 2900V is
completed. Please refer to Figure 2-28.
Figure 2-28. Table of LAN-to-LAN settings in Vigor 2900V