Installation guide

17
Dial-Out Settings
It deals with relevant settings of Dial-Out connection. In this example, we do not need to
configure this part.
Figure 2-25. Dial-Out settings in Vigor 2900V
Dial-In Settings
It deals with relevant settings of Dial-In connection, including encryption method,
preshared key and the WAN IP of remote site.
Select IPSec Tunnel and enter the WAN IP 220.135.240.207 of Vigor 2900V. Press the
IKE Pre-Shared Key button, and then a window will pop up. Type 3300 (It must be
identical with 3300V's). Press the “Confirm” button to finish the configuration of IKE
Pre-Shared Key. Please refer to Figure 12-7.
Figure 2-26. Dial-In settings in Vigor 2900V