Installation guide

16
Step 3
Click Index 1 and enter relevant settings for the VPN tunnel to Vigor 3300V. Please refer
to Figure 12-4.
Figure 2-23. Enter relevant VPN setup
Step 4
On this page there are four sections for relevant VPN setup as below.
Common Settings
These are basic settings, including profile name, enable or disable the profile, call
direction, etc.
Profile Name
Specify a name to this profile. To facilitate easy management and differentiation, please
type 3300V.
Call Direction
Specify the call direction to this profile. In this example the connection is initiated from
V3300V to Vigor 2900V, so please select Dial-In.
Idle Timeout
By default, it is 300 seconds. If the profile connection is idle over the threshold of the
timer, the router will drop the connection.
Please refer to Figure 12-5.
Figure 2-24. Common settings in Vigor 2900V