Installation guide

11
TCP/IP Network Settings
It deals with the internal network of the remote site, etc.
In the Network IP and Mask field, enter 192.168.33.0 and 255.255.255.0 respectively,
and then press “OK” to finish the configuration. Please refer to Figure 2-12.
Figure 2-12. TCP/IP network settings of Vigor2900V
Step 5
After configuration, the router will automatically switch to the LAN-to-LAN Profiles
Setup page. Confirm if the settings are correct. Now the setup configuration for of
Vigor2900V is completed. Please refer to Figure 2-13.
Figure 2-13. Created profiles of Vigor2900V
Step 6
Enter the main page of Vigor2900V and click the VPN Connection Management link.
From the pull-down menu, select
(3300V) 220.135.240.207
, and then press “Dial”. Vigor
2900V will initiate the VPN connection to Vigor 3300V. Please refer to Figure 2-14.
Figure 2-14. Connection settings of Vigor2900V