Installation guide

10
Dial-Out Setting
It deals with relevant settings of Dial-Out connection, including encryption method,
preshared key and remote site's WAN IP.
Select IPSec Tunnel and enter the WAN IP 220.135.240.207 of Vigor 3300V. Press the
IKE Pre-Shared Key button, and then a window will pop up. Just type 3300 (It must be
identical to 3300V's). Press finish the configuration of IKE Pre-Shared Key. Then click
High (ESP) and select DES with Authentication (default is DES without
Authentication).
Figure 2-10. Dial-out settings of Vigor 2900V
Dial-in Setting
It deals with relevant settings of Dial-In connection. In this example you do not need to
configure this part.
Figure 2-11. Dial-in settings of Vigor 2900V