Installation guide

113
Configuration:
1. Block LAN-to-LAN communication.
2. Create VLAN5, VLAN6, VLAN7 and VLAN8 Groups.
3. In the VLAN5, input “5” to VLAN ID. In the Member field, choose p1. Then
choose the “Tagged” for Frame Tag Operation in p1. We can ignore the PVID
(Port VLAN ID), because 802.1q tag will be inserted to the frame from the PC of
Engineer Department.
4. In the VLAN6, input “6” to VLAN ID. In the Member field, choose p2. Then
choose the “Tagged” for Frame Tag Operation in p2. We can ignore the PVID
(Port VLAN ID), because 802.1q tag will be inserted to the frame from Engineer
Department.
5. In the VLAN7, input “7” to VLAN ID. In the Member field, choose p3. Then
choose the “Tagged” for Frame Tag Operation in p3. We can ignore the PVID
(Port VLAN ID), because 802.1q tag will be inserted to the frame from the PC of
Engineer Department.
6. In the VLAN8, input “8” to VLAN ID. In the Member field, choose p4. Then
choose the “Untagged” for Frame Tag Operation in p4. We should configure the
PVID to “8”, because the device does not support 802.1Q VLAN.
7. After applying the settings, the web page will be redirected to “reboot” web page.
User can ignore it and continue to configure the Network setting. After Network
setting, then you can do the reboot procedure.
Note After rebooting, the tagged ports will only communicate with 802.1Q tagged
devices.
Figure 5-19. LAN VLAN setting
The network configuration is the same with application 1. Please refer to application 1
part.
Application 5:
A company wants to separate the Engineer Department, Sales Department, Marketing
Department and other departments to limit their communication with each other to ensure
the security. Many employees of the company use some switches supported 802.1Q