Installation guide

112
(Port VLAN ID), because 802.1q tag will be inserted to the frame from company
D.
7. After applying the settings, the web page will be redirect to “reboot” web page.
User can ignore it and continue to configure the Network setting. After Network
setting, then you can do the reboot procedure.
Note After rebooting, the tagged ports will only communicate with 802.1Q tagged
devices.
Figure 5-17. LAN VLAN setting
The network configuration is the same with application 1. Please refer to application 1
part.
Application 4:
A company wants to separate the Engineer Department, Sales Department, Marketing
Department and guest to limit their communication with any department to ensure the
security. So, we defined four VLANs that are VLAN5, VLAN6, VLAN7 and VLAN8,
the subnet of VLAN5 is 192.168.1.0, the subnet of VLAN6 is 192.168.2.0, the subnet of
VLAN7 is 192.168.3.0, and the subnet of VLAN8 is 192.168.4.0. However, the notebook
of guest does not support 802.1Q.
Figure 5-18. Application 4