Installation guide

110
Figure 5-13. LAN VLAN configuration
6. In the Network setting, input the subnet 192.168.1.0 to LAN. For example, the
VLAN5 LAN IP is 192.168.1.1 and Subnet Mask is 255.255.255.0. Then, users in
the Engineer Department can set IP address from 192.168.1.2 to 192.168.1.254.
Figure 5-14. LAN IP configuration
7. In the Network setting, input the subnet 192.168.2.0 to LAN2. For example, the
VLAN6 LAN IP is 192.168.2.1 and Subnet Mask is 255.255.255.0. Then, users in
the other departments can set IP address from 192.168.2.2 to 192.168.2.254.
Figure 5-15. LAN2 IP configuration