User`s guide

Vigor3200 Series User’s Guide
209
Profile Name
Specify a name for the profile of the LAN-to-LAN connection.
Enable this profile
Check here to activate this profile.
VPN Dial-Out Through
Use the drop down menu to choose a proper WAN interface for
this profile. This setting is useful for dial-out only.
WAN1 /WAN2 /WAN3 /WAN4 /WAN5 First - While
connecting, the router will use WAN1 /WAN2 /WAN3 /WAN4
/WAN5 as the first channel for VPN connection. If WAN1 fails,
the router will use another WAN interface instead.
WAN1 /WAN2 /WAN3 /WAN4 /WAN5 Only - While
connecting, the router will use WAN1 /WAN2 /WAN3 /WAN4
/WAN5 as the only channel for VPN connection.
Netbios Naming Packet
Pass – click it to have an inquiry for data transmission between
the hosts located on both sides of VPN Tunnel while
connecting.
Block – When there is conflict occurred between the hosts on
both sides of VPN Tunnel in connecting, such function can
block data transmission of Netbios Naming Packet inside the