User`s guide

Vigor3200 Series User’s Guide
178
After you click the Edit link, you will see the following page. Now you can define the name
for that Class. In this case, “Test” is used as the name of Class Index #1.
For adding a new rule, click Add to open the following page.
ACT
Check this box to invoke these settings.
Local Address
Click the Edit button to set the local IP address (on LAN) for
the rule.
Remote Address
Click the Edit button to set the remote IP address (on
LAN/WAN) for the rule.
Edit
It allows you to edit source address information.
Address Type – Determine the address type for the source
address.
For Single Address, you have to fill in Start IP address.
For Range Address, you have to fill in Start IP address and
End IP address.
For Subnet Address, you have to fill in Start IP address and