User`s guide

Vigor3200 Series User’s Guide
134
To edit Filter Rule, click the Filter Rule index button to enter the Filter Rule setup page.
Check to enable the Filter
Rule
Check this box to enable the filter rule.
Comments
Enter filter set comments/description. Maximum length is 14-
character long.
Index(1-15)
Set PCs on LAN to work at certain time interval only. You
may choose up to 4 schedules out of the 15 schedules
pre-defined in Applications >> Schedule setup. The default
setting of this field is blank and the function will always work.
Direction
Set the direction of packet flow. It is for Data Filter only. For
the Call Filter, this setting is not available since Call Filter is
only applied to outgoing traffic.
Note: RT means routing domain for 2nd subnet or other LAN.
Source/Destination IP
Click Edit to access into the following dialog to choose the
source/destination IP or IP ranges.