User`s guide

Vigor3200 Series User’s Guide
126
Enable Open Ports
Check to enable this entry.
Comment
Make a name for the defined network application/service.
WAN IP
Specify the WAN IP address that will be used for this entry. This
setting is available when WAN IP Alias is configured.
Local Computer
Enter the private IP address of the local host or click Choose PC to
select one.
Choose PC
Click this button and, subsequently, a window having a list of
private IP addresses of local hosts will automatically pop up.
Select the appropriate IP address of the local host in the list.
Protocol
Specify the transport layer protocol. It could be TCP, UDP, or
----- (none) for selection.
Start Port
Specify the starting port number of the service offered by the local
host.
End Port
Specify the ending port number of the service offered by the local
host.