User`s guide

Vigor3200 Series User’s Guide
106
General Setup-----
Allow to configure settings for each subnet respectively.
Index
Display all of the LAN items, DMZ and IP Routed Subnet.
Status
Check the box to enable such LAN configuration. Basically, LAN1
status is enabled in default. LAN2, LAN3, LAN4 and IP Routed
Subnet can be observed by checking the box of Status.
DHCP
Check the box to enable DHCP server for such LAN configuration.
LAN1 is configured with DHCP in default. If required, please
check the DHCP box for each LAN.
IP Address
Display the IP address of the LAN configuration. Display the IP
address for each LAN item. Such information is set in default and
you can not modify it.
Details Page
Click it to access into the setting page. Each LAN will have
different LAN configuration page. Each LAN must be
configured in different subnet.
Inter-LAN Routing ---
Check the box to allow to link or route two subnets.
Subnet
Display four LANs and one DMZ PORT available for routing.
LAN 1 ~ LAN 4, DMZ
PORT
Check the box to make the routing among LANs.
To configure LAN 1 ~ LAN 4, DMZ or IP Routed Subnet, simply click Details Page to open
the settings page.