Setup guide

Task 2 – Configure VPN Tracker

This section describes how to configure VPN Tracker to connect to your DrayTek. You will need the

configuration information you collected during Task 1.

‣

Start VPN Tracker

‣

Click the “+” button in the main window

You will be asked to select a device profile for the

new connection:

‣

Select “DrayTek” from the list

‣

Select your device from the list of DrayTek

devices.

‣

If there is more than one choice, choose

“Remote Dial-In User Profile”.

Do not choose the legacy “LAN-to-LAN”

profile if your device supports IPsec VPN for

Remote Dial-In User profiles (the LAN-to-LAN

profile configuration is not described in this

guide).

‣

Connection Name: Choose a name for your

connection (e.g. “Office”)

‣

Click “OK”