Setup guide

Step 5 - Retrieve the LAN Settings
2
➏
➌
➍
‣
Click on the large “Vigor ... Series” logo at the very top left
corner of the configuration interface to get to the “System
Status” display
‣
LAN IP Network Configuration
‣
Write down the “1st IP Address” ➌
‣
Write down the “1st Subnet Mask” ➍
‣
Calculate your LAN Network Address by applying the LAN
Subnet Mask ➍ to the LAN IP Address ➌:
‣
Applying the subnet mask means setting those elements
of the IP address to 0 where the subnet mask is 0, and
preserving all elements where the subnet mask is 255. In
our example:
Write down the LAN Network Address you have
calculated as ➎
‣
WAN IP Network Configuration
‣
Write down the IP address ➏
192 168 13 1
255 255 0255. . .
. . .
LAN Subnet Mask
LAN IP Address
applied to
LAN Network Address 192 168 13 0
. . .
14