Operation Manual

Vigor2926 Series User’s Guide
338
Certificate Authentication If certificate authentication is required for OpenVPN, simply
check the box to apply the trusted CA certificate and local
certificate for OpenVPN tunnel.
Certificate authentication can offer more secure VPN tunnel
between the client and the router.
After finishing all the settings here, please click OK to save the configuration.
V
V
-
-
1
1
-
-
7
7
-
-
2
2
C
C
l
l
i
i
e
e
n
n
t
t
C
C
o
o
n
n
f
f
i
i
g
g
The settings on this page can be downloaded as a file. Later, such file can be imported and
applied to remote end’s CPE (as VPN client). Then, a private connection via OpenVPN tunnel
between the server and the client can be connected successfully.
Available settings are explained as follows:
Item Description
Remote Server Click IP and use the drop down list to specify an IP address of
WAN for VPN connection. Or click Domain to enter a domain
name for the remote server.
Transport Protocol Simply choose UDP or TCP as protocol for building OpenVPN
connection between the server and the remote client.
Config Finename Enter a name for the configuration file.
CA cert Enter the certificate authority (CA) file name obtained from
3rd party provider
Client cert Each client in an OpenVPN connection must have its
certificate and private key.
Enter the certificate file name obtained from 3rd party
provider
Client key Enter the private key file name obtained from 3rd party