Operation Manual

Vigor2926 Series User’s Guide

Available settings are explained as follows:

Item Description

Index Display the WAN interface.

Display Name It shows the name of the WAN1/WAN2/WAN3 or LTE/WAN4

that entered in general setup.

Physical Mode It shows the physical connection for WAN1/WAN2

(Ethernet) /WAN3 or LTE /WAN4 (USB) according to the

real network connection.

Access Mode Use the drop down list to choose a proper access mode. The

details page of that mode will be popped up. If not, click

Details Page for accessing the page to configure the

settings.

Details Page This button will open different web page (based on IPv4)

according to the access mode that you choose in WAN

interface.

IPv6 This button will open different web page (based on Physical

Mode) to setup IPv6 Internet Access Mode for WAN

interface.

If IPv6 service is active on this WAN interface, the color of

“IPv6” will become green.

DHCP Client Option This button allows you to configure DHCP client options.

DHCP packets can be processed by adding option number

and data information when such function is enabled and

configured.