Operation Manual

Vigor2926 Series User’s Guide
455
Mobile one-Time Password (mOTP) – Click it to
use mOTP as the advanced authentication
method. Enter the PIN code and secret settings for
one-time usage.
2-Step Authentication via SMS Profil
e and/or
Mail Profile
– Click it to use authentication code
as the advanced authentication method. The
authentication code will be sent out based on the
selected SMS profile and Mail profile.
 Add – After typing the user name and password above,
simply click it to create a new local user. The new one
will be shown on the Local User List immediately.
 Edit – If the username listed on the box above is not
satisfied, simply click the username and modify it on
the field of User Name. Later, click Edit to update the
information.
 Delete – If the local user listed on the box above is not
satisfied, simply click the username and click Delete to
remove it.
 Use only advanced authentication method for Admin
“WAN” login – Advanced authentication method can
offer a more secure network connection. In general,
the above basic password setting will be used for
authentication if such option is disabled. Simply check
the box to enable the following settings.
Administrator LDAP
Setting
Enable LDAP/AD login for admin users – If it is enabled, any
user can access into the web user interface of Vigor router
through the LDAP server authentication.
Available profiles will be displayed here under the link of
LDAP Profile Setup. To create a new profile, simply click the
link of LDAP Profiles Setup
.
After finishing all the settings here, please click OK to save the configuration. After logging
out the webuser interface, please use the new password to access into the web user interface
again.