Operation Manual

Vigor2926 Series User’s Guide
404
Note: RT means routing domain for 2nd subnet or other
LAN.
Source IP/ Country
and
Destination IP /
Country
Click Edit to access into the following dialog to choose the
IP object or country object as source IP or destination IP.
To set the IP address manually, please choose Any
Address/Single Address/Range Address/Subnet Address as
the Address Type and type them in this dialog. In addition,
if you want to use the IP range from defined groups or
objects or any IP in a country, please choose Group and
Objects or Country Object as the Address Type.
From the IP Group drop down list, choose the one that you
want to apply. Or use the IP Object drop down list to
choose the object that you want.
Service Type Click Edit to access into the following dialog to choose a
suitable service type.