Operation Manual

Vigor2926 Series User’s Guide
368
(d) Select IPsec Tunnel for Type of Sever I am Calling.
(e) Enter VPN Server's WAN IP or domain name in Sever IP/Host Name for VPN.
(f) Click IKE Pre-Shared Key and enter the same Pre-Shared key as VPN Server.
(g) Click on Advanced in IPsec Security Method.
In IKE advanced settings,
(h) Select Main Mode for IKE phase 1 mode.
(i) Make sure phase 1 and phase 2 proposal are using the security methods which are
accepted by VPN server.
(j) Click OK to save.
3. In TCP/IP Network Settings, enter VPN Server's LAN Network in Remote Network IP and
Remote Network Mask. Click OK to save the profile.