Operation Manual

Vigor2926 Series User’s Guide
366
In Common Settings,
(a) Enter the Profile Name.
(b) Enable this profile.
(c) Set Call Direction to Dial-in.
In Dial-In Setting,
(d) Make sure Allowed Dial-in Type has IPsec Tunnel enabled.
(e) Enable Specify Remote VPN Gateway and enter Peer VPN Server IP as the public
IP of VPN client router.
(f) Click on IKE Pre-Shared Key and enter the Pre-shared Key.
(g) Select the IPsec Security Method that are allowed to use.
3. In TCP/IP Network Settings, enter VPN Client's LAN network in Remote Network IP and
Remote Network Mask. Click OK to save the profile.