Operation Manual

Vigor2832 Series User’s Guide
76
3G /4G USB Modem (PPP
mode)
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
SIM PIN code Type PIN code of the SIM card that will be used to access
Internet.
The maximum length of the PIN code you can set is 15
characters.
Modem Initial String Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to
your ISP.
The maximum length of the string you can set is 47
characters.
APN Name APN means Access Point Name which is provided and
required by some ISPs. Type the name and click Apply.
The maximum length of the name you can set is 43
characters.
Modem Initial String2 The initial string 1 is shared with APN.
In some cases, user may need another initial AT command to
restrict 3G band or do any special settings.
The maximum length of the string you can set is 47
characters.
Modem Dial String Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to
your ISP.
The maximum length of the string you can set is 31
characters.
Service Name Enter the description of the specific network service.
PPP Username Type the PPP username (optional). The maximum length of
the name you can set is 63 characters.
PPP Password Type the PPP password (optional). The maximum length of
the password you can set is 62 characters.
PPP Authentication Select PAP only or PAP or CHAP for PPP.
Index (1-15) in Schedule
Setup
You can type in four sets of time schedule for your request.
All the schedules can be set previously in Application >>
Schedule web page and you can use the number that you
have set in that web page.
WAN Connection
Detection
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system to
execute for WAN detection. If you choose Ping Detect as the
detection mode, you have to type required settings for the
following items.
 Primary/Secondary Ping IP – If you choose Ping Detect as