Operation Manual

Vigor2832 Series User’s Guide
711
-e Enable User management function.
-l all
-l userl
-l ip
Show online user.
all – all of the users will be displayed on the screen.
user name – type the user name that you want to view on the
screen.
ip – type the IP address that you want to view on the screen.
-o It means to show user account information.
e.g.,-o
-q It means to trigger the alert tool to do authentication.
-r [user name | all] Remove the user record.
user name – type the name of the user profile.
all – all of the user profile settings will be removed.
-s It means to set login service.
0:HTTPS
1:HTTP
e.g.,-s 1
-buser [user name]
-b ip [ ip address]
Block specifies user or IP address.
user name – type the user name that you want to block.
ip address –– type the IP address that you want to block.
-u user [user name]
-u ip [ ip address]
Unblock specifies user or IP address.
user name – type the user name that you want to unblock.
ip address –– type the IP address that you want to unblock.
User edit
PROFILE_IDX Type the index number of the profile that you want to edit.
-a [Param] Enable/Disable Internal RADIUS server.
0:Disable
1:Enable
-d Disable User profile function.
-e Enable User profile function.
-f [Param] Enable/Disable Local 802.1X user.
0:Disable
1:Enable
-I [Param] Set the idle time. 0:Unlimited, MAX:255. e.g., -i 60
-m [Param] Set the maximum login user number. 0:Unlimited, MAX:2000.
-n [Param] It means to set a user name for a profile.
e.g.,-n fortest
-p [Param] It means to configure user password.
e.g., -p 60fortest
-q [Param] It means to set time quota (1 ~ 65535) of the user profile.
e.g., -q 200
-r [Param] It means to set data quota (1 ~ 65535) of the user profile.
e.g., -r 1000
-s [Param] It means to set schedule index .
“sch_idex” could be 1 to 15.
-t [Param] It means to enable /disable time quota limitation for user profile.
0:Disable