Operation Manual

Vigor2832 Series User’s Guide
5
9
status.
Active When If you choose Failover as the Active Mode, the option of
Active When will appear.
 Any of the selected WAN disconnect – Such WAN
connection will be activated when any selected WAN
interface (checked below) disconnects.
 All of the selected WAN disconnect – Such WAN
connection will be activated only when all of selected
WAN interfaces (checked below) disconnect.
 Check boxes for WAN1 to WAN5 – Specify the WAN
interface by checking the WAN box.
After finished the above settings, click OK to save the settings.