Operation Manual
Vigor2832 Series User’s Guide
55
Physical Mode / Type Display the physical mode and physical type of such WAN
interface.
Line Speed(Kbps)
DownLink/UpLink
Display the downstream and upstream rate of such WAN
interface.
Active Mode Display whether such WAN interface is Active device or
backup device.
Backup (WAN#)- Display the backup WAN interface for such
WAN when it is disabled.
Info
In default, each WAN port is enabled.
After finished the above settings, click OK to save the settings.
I
I
I
I
-
-
1
1
-
-
1
1
-
-
1
1
W
W
A
A
N
N
1
1
(
(
A
A
D
D
S
S
L
L
)
)
Vigor router will detect the physical line is connected by ADSL automatically. Therefore, this
page allows you to configure settings for ADSL at one time. That is, it is not necessary for you
to configure different profile settings for ADSL respectively.
Available settings are explained as follows:
Item Description
Enable Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Display Name Type the description for such interface.
Physical Mode Display the physical mode of such interface.
Physical Type For such interface, no type can be selected.
Line Speed (Kpbs) If your choose According to Line Speed as the Load
Balance Mode in previous page, please type the line speed
for downloading and uploading for such WAN interface. The