Operation Manual

Vigor2832 Series User’s Guide
520
4. Edit the profile.
a. Enter description of this profile.
b. Enter VPN Server's IP in Server.
c. Enter Port as the port which VPN server uses for SSL VPN; for Vigor Routers, it is 443
by default.
d. Tap SAVE to save the profile or “<” to cancel.
Info Installation of relevant Root CA is required to enable server certificate
authentication.
If you check “Use default gateway on remote network”, all the traffic of this
smart device will be forwarded to the remote gateway.
5. Tap the profile bar to establish SSL VPN tunnel.
6. Enter Username and Password, then tap Dial.