Operation Manual

Vigor2832 Series User’s Guide
225
When you check PPTP & IPsec & L2TP (three types) or PPTP & IPsec (two types) or L2TP
with Policy (Nice to Have/Must), you will see the following graphic:
Available settings are explained as follows:
Item Description
Profile Name Type a name for such profile. The length of the file is limited
to 10 characters.
User Name This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPsec policy above.
The length of the name is limited to 11 characters.
Password This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPsec policy above.
The length of the name is limited to 11 characters.
Pre-Shared Key For IPsec/L2TP IPsec authentication, you have to type a
pre-shared key.
The length of the name is limited to 64 characters.
Confirm Pre-Shared
Key
Type the pre-shared key again for confirmation.
Digital Signature
(X.509)
Check the box of Digital Signature to invoke this function.
Peer ID – Choose the peer ID selection from the drop down
list.
Local ID – Choose Alternative Subject Name First or Subject
Name First.
Peer IP/VPN Client IP Type the WAN IP address or VPN client IP address for the
remote client.
Peer ID Type the ID name for the remote client.
The length of the name is limited to 47 characters.
Remote Network IP Please type one LAN IP address (according to the real
location of the remote host) for building VPN connection.