Operation Manual

Vigor2832 Series User’s Guide
208
128 bit sync field. However, some original 11b wireless
network devices only support long preamble. Click Enable to
use Long Preamble if needed to communicate with this kind
of devices.
Tx Power Set the power percentage for transmission signal of access
point. The greater the value is, the higher intensity of the
signal will be.
WMM Capable To apply WMM parameters for wireless data transmission,
please click the Enable radio button.
APSD Capable The default setting is Disable.
Fragment Length
(256 – 2346)
Set the Fragment threshold of wireless radio. Do not modify
default value if you don’t know what it is, default value is
2346.
RTS Threshold (1 – 2347) Minimize the collision (unit is bytes) between hidden stations
to improve wireless performance.
Set the RTS threshold of wireless radio. Do not modify default
value if you don’t know what it is, default value is 2347.
After finishing all the settings here, please click OK to save the configuration.